Standing water after a storm or burst pipe
We extract standing water with truck-mounted extractors and water pumps, often within hours of your call. Then we map moisture and set drying equipment so the structure dries before mold can colonize.
Emergency Water Damage Extraction in Florida starts with a phone call and ends with a dry, verified structure. We pull standing water from flooded basements, storm-soaked condos, and burst-pipe crawlspaces across the state, then dry the framing, drywall, and subfloor before mold gets a foothold. One crew handles extraction, moisture mapping, and documentation for your insurance claim. We answer 24/7, including holidays.

Emergency Water Damage Extraction in Florida is the emergency removal of standing water from a structure using truck-mounted water extractors, portable extraction units, and water pumps, followed by structural drying to prevent mold and warping. When a supply line bursts at 2 a.m. or a storm pushes water through a sliding door, every hour of standing water raises the odds of mold growth, cupped hardwood, and a denied insurance claim. We extract the water, map the moisture with a moisture meter and thermal imaging camera, and set drying equipment the same day.
Florida homes face water intrusion from burst pipes, roof leaks, toilet overflows, sewage backups, appliance leaks, and storm surge flooding. In coastal and low-lying neighborhoods, a slab leak or hurricane water intrusion can soak a home in minutes. Our crews carry Florida emergency water removal equipment sized for both a single bathroom and a 40,000-square-foot commercial floor. If you are searching for 24/7 emergency water extraction near me Florida, we are the crew that shows up with the truck, the hose, and the drying plan.
Our standard extraction and drying package covers the emergency response, the water removal, the drying equipment, and the documentation. We tell you upfront what is included so there are no surprises on the invoice. Add-on services like reconstruction or mold remediation are quoted separately if needed.
Truck-mounted and portable extraction of standing water from floors, carpets, and low areas. Includes water pump use for basements and deep standing water. Most residential jobs are extracted in two to four hours.
Room-by-room moisture readings with a moisture meter, thermal imaging camera, and infrared thermometer. We photograph affected materials and log readings daily so your insurance claim has a complete record.
Air movers, dehumidifiers, floor drying mats, and wall cavity drying vents placed to dry the structure. Desiccant dehumidifiers for dense materials. Equipment runs three to five days with daily monitoring.
Application of antimicrobial solution and disinfectant to affected framing, drywall edges, and subfloor. This slows mold growth while the structure dries. Included on every job, not an upsell.
Final readings on every affected area to confirm the structure hit dry standard. We remove equipment, provide a drying report, and leave you with documentation for your records and your adjuster.
You call, we ask what happened, where the water is, and whether the source is stopped. We dispatch the nearest crew and give you an arrival window. If the water is still running, we walk you through shutting off the main valve before we arrive.
On arrival, we inspect the source, then map moisture with a moisture meter, thermal imaging camera, and borescope camera. We check wall cavities, ceilings, and subfloors because water travels. This inspection takes 20 to 40 minutes and tells us exactly where to extract.
We run truck-mounted water extractors for large volumes and portable extraction units for tight spaces like closets and under cabinets. A water pump handles standing water in flooded basements. Most residential extractions take two to four hours.
We set air movers, dehumidifiers, and floor drying mats, and install wall cavity drying vents where needed. Desiccant dehumidifiers handle dense materials. Equipment runs 3 to 5 days, and we monitor moisture readings daily until the structure hits dry standard.
We re-check every affected area with the moisture meter and infrared thermometer, remove equipment, and provide a drying report with photos and readings. If any material still reads wet, we keep drying at no extra equipment charge.
Purpose-built equipment, used by trained technicians — so the job is done accurately the first time.
Pulls hundreds of gallons per minute from flooded floors. The fastest way to remove standing water from a large area.
Reaches tight spaces like closets, under cabinets, and upper floors where the truck cannot park.
Finds hidden moisture behind walls and above ceilings without opening every surface.
Inspects inside wall cavities and under floors to confirm moisture and check for mold growth.
Dries dense materials and low-permeability spaces where standard dehumidifiers fall short.
Filters airborne mold spores and dust during extraction and drying to protect indoor air quality.
Dries hardwood and engineered flooring from the surface down without removing the boards.
A supply line burst under the kitchen sink overnight and ran for six hours. Water spread across 600 square feet of hardwood and soaked the baseboards and lower drywall. The homeowner called us at 6 a.m.
We extracted the standing water in three hours, pulled the wet baseboards, and dried the hardwood with floor drying mats. Moisture readings hit dry standard in four days. The hardwood was saved, and no mold grew.
A tropical system pushed water through sliding glass doors and soaked 400 square feet of carpet and the lower wall cavities. The condo sat wet for 18 hours before the owner called.
We extracted the water, removed the wet carpet pad, and dried the wall cavities with vents and air movers. The structure hit dry standard in five days. The adjuster approved the claim based on our documentation.
A main line backup pushed sewage into a ground-floor bathroom and hallway. About 200 square feet were contaminated, including drywall and vinyl flooring. The tenant called the property manager immediately.
We extracted the water in PPE, removed the contaminated drywall and flooring, treated the area with antimicrobial solution, and dried the structure in four days. The unit was re-occupied by Friday.
Water damage in Florida is not one problem. It is storm surge, slab leaks, aging plumbing, and humidity that never lets materials dry on their own. Here are the most common issues we solve for Florida homeowners and property managers.
Ask a pro →We extract standing water with truck-mounted extractors and water pumps, often within hours of your call. Then we map moisture and set drying equipment so the structure dries before mold can colonize.
We use thermal imaging cameras and borescope cameras to find moisture behind walls and above ceilings. Then we extract, open cavities where needed, and dry with wall cavity drying vents.
We treat sewage backups as contaminated losses. Full PPE, removal of affected materials, antimicrobial treatment, and disinfection before drying. We document the loss properly for your claim.
We photograph affected materials, log moisture readings daily, and build an Xactimate-ready scope. Your adjuster gets the drying log and equipment inventory needed to approve the claim.
“A supply line burst under our kitchen sink at 11 p.m. We called and a crew was at the house in about 75 minutes. They pulled the water, set air movers and a dehumidifier, and checked the cabinets with a moisture meter. Four days later everything was dry and the insurance paperwork was already submitted. No mold, no drama.”
Marcus T.Homeowner, Jacksonville
✓ Verified“Storm water came through our sliding doors during a tropical system and soaked the living room carpet and part of the wall. The crew extracted the water, pulled the wet pad, and dried the wall cavity with vents. They documented everything for our adjuster. Our neighbor used a different company and had mold three weeks later. We did not.”
Sandra R.Condo Owner, Bal Harbour
✓ Verified“We manage 40 rental units and a sewage backup hit one of them on a Sunday. The crew showed up in PPE, extracted the water, treated the area with antimicrobial, and removed the contaminated drywall. They had the unit dry in four days and the tenant back in by Friday. That is the response we need.”
Dwayne K.Property Manager, Lakeland
✓ VerifiedIt is the emergency removal of standing water from a Florida structure using truck-mounted extractors, pumps, and portable units, followed by structural drying. It is not just vacuuming water. It includes moisture mapping, antimicrobial treatment, equipment placement, and daily monitoring until the building hits dry standard. Most jobs take two to five days from extraction to final verification.
Typical 2026 pricing in Florida runs $1,200 to $4,500 for a residential extraction and drying job, depending on square footage, water category, and how long the water sat. Clean-water jobs with fast response cost less. Sewage backups and storm surge flooding cost more because of contamination and material removal. Most insurance policies cover the work.
We typically arrive within 60 to 90 minutes in metro areas and start extraction within 15 minutes of arrival. A standard flooded living room takes two to four hours to extract. Larger losses, like a flooded basement or a commercial floor, can take six to eight hours. Every hour you wait increases mold risk and repair cost.
Yes. We answer calls 24 hours a day, seven days a week, including holidays and during hurricane season. Night and weekend dispatch is the same number and the same response standard. If your water heater lets go at 2 a.m., call and we will send the nearest crew.
We deliver Florida emergency water removal across the entire state, from the Panhandle to the Keys. Our crews are positioned in major metros so we can reach most homes and businesses within 60 to 90 minutes. Whether you are in a coastal condo, an inland ranch, or a commercial building, we bring the same equipment, the same certifications, and the same drying standard.
Water damage gets worse every hour. Call us and we will dispatch the nearest crew, extract the water, and start drying the same day. We answer 24/7, we bill insurance directly when your policy allows, and we stand behind the drying results in writing.
Get Emergency Help +18555742638 →Call us any time, day or night. We answer 24/7 and dispatch crews across Florida with truck-mounted extractors and drying equipment. Most addresses see a tech within the hour. If you prefer email, send photos of the damage and we will get back to you fast with next steps.